Front Brake Pad LR027309 For Land Rover

 Front Brake Pad LR027309 For Land Rover

Description

• LR027309 is a front brake pad set for Land Rover vehicles.
• The product is typically supplied as the complete set for the front axle (both wheels) and designed to fit the caliper and rotor setup that Land Rover specified for certain Evoque models.
• As with many modern brake pad sets, the friction material, backing plate and often the wear indicators (if fitted) are integrated.
• When replacing, one should inspect the rotor condition, pad wear evenness, any sensor or shim fitment, hardware (springs/clips) etc. Because compatibility depends on rotor size, caliper type and manufacture date.

·         Length: 155 mm / 156.4 mm

·         Width: 66.6 mm / 72.1 mm

·         Thickness: 18.5 mm / 19.5 mm

·         Note: These dimensions come from a specific aftermarket listing that references LR027309.

Fitment / Vehicles

The common fitment information (but always check your VIN or build sheet) includes:

• Fits the Range Rover Evoque (3-door Coupe and 5-door) from about 2012–2018 (or up to ~2019 for some markets).
• For vehicles “with 300mm front discs” as listed for some listings.
• Some sources also list fitment for other Land Rover / Rover models (aftermarket listings) where the part number LR027309 is cross-referenced. E.g., free-lander or other Rover applications in aftermarket catalogs.
• Always verify that your vehicle uses the correct rotor size and caliper type. Using the wrong pad set may lead to improper fit or premature wear.

Alternative / Interchange Part Numbers

There are several known “replacement” or interchangeable part numbers from aftermarket manufacturers. According to listings:

• Ferodo → FDB 1897.
• Bosch → 0 986 494 246.
• Delphi → LP 1967.
• TRW → GDB 1925.
• ATE → 13.0460-7228.2 (one listing)
• Genuine Land Rover listings indicate part number LR027309 (or LR027309G in some packaging) as the OE.

Key Notes / Tips for Bangladesh / Import

• When ordering in Bangladesh (or importing), ensure you verify the front rotor diameter, pad backing plate shape, park-brake/shim/wear sensor fitment (if applicable) — because even though the part number is stated, slight variations may exist by market or year.
• If your vehicle has a larger front disc (for example an upgraded sport variant) there might be a different pad set — so match the VIN/build.
• Refresh the brake hardware (clips/springs) and check the rotor surface — uneven rotors cause premature pad wear or noise.
• After fitting new pads, bed-in (break-in) procedure is recommended to ensure even pad / rotor contact and optimal braking.
• Keep the receipt or part documentation showing the interchange number for future service and verification.

If you like, I can check local suppliers in Bangladesh (Dhaka) stocking LR027309 (or equivalent) including price and shipping info. Would you like me to search that?